Home & Gardening Warehouse

Top 10 Best Benchtop Jointer in 2018

A benchtop jointer is an important tool if your line of work deals with woodwork. It is what you need if to flatten your wood. Other than making your timber visually appealing, it also enhances its durability. Did you know that it is advisable to buy a benchtop jointer instead of a planner if you cannot afford the two? That speaks volumes regarding what a great investment it could be. If you purchase a good one, your job will be impressive and without a tear

However, there are just many types of jointers in the market, and not all are best for every work. These differences span sizes, uses, strength and designs. To get the best and the most appropriate for your job, we have your back in our list of the top 10 Best Benchtop Jointer in 2018.

Below is our list of the best benchtop jointers for 2018.


Top 10 Best Benchtop Jointer in 2018

10. PORTER-CABLE PC160JT Variable Speed 6″ Jointer

PORTER-CABLE PC160JT Variable Speed 6" JointerOn top of our list is this benchtop jointer by POWER-CABLE. It would simplify your woodwork whether you are interested in flattening, edging or face jointing. Those who have used it understands too well why we chose is to be part of our list. If you follow the advice, you will join those reaping its benefits. Check it out!

During its design, the manufacturer had in mind the fact that the hardness of the materials that will require cutting may differ. Therefore, they ensured that you are at liberty to choose the speed you find right for the job at hand.

In addition to that, the arrangement of the knife cutter heads and the jack screw knife is leveling hence incredible. The quality is not even debatable. This brand has produced materials that have passed the test of time.

Features
  • The speed ranges between 6,000 and 11,000 RMP
  • That of the cutter head ranges from 12,000 to 22,000 cuts in a single second
  • It is easy to not only replace but also adjust the knife
  • Edge jointing cannot be any accurate considering the support offered by the center mounted fence
  • It has a built-in cutter head lock. 


9. Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer

Delta Power Tools 37-071 6 Inch MIDI-Bench Jointer - Benchtop Jointer

Here is another benchtop jointer from DELTA Power Equipment Corporation. This 76 pounds machine is the real deal in precision-machine of tables and benchtops. It is a massive duty machine with cast iron fence that gives adequate support for the settings bringing out accurate jointing.

It also has a simple fence system giving adjustable positive stops at angles 90 and 45. There is always perfection that comes out with good finishing on this particular gadget. Lastly, it comes with a 5-year limited warranty.

For almost a century, the company has been manufacturing woodwork tools. When it comes to this particular one, they have beyond any reasonable doubt mastered the art of building bench jointers that meet the requirements of the user.

For instance, every element that the design incorporates aims at ensuring accurate cutting. What more would one wish for? The materials are cast iron and aluminum. Each of them is known for quality. They result in a sturdy construction that ensures that the product lasts for long.

Features
  • It has a relatively large weight that not only provides stability but also reduces vibration
  • It has two knives
  • The cutter head speed is 10,000 RPM
  • Expect 20,000 cuts per minute
  • The diameter of the head is 1 7/8 inches
  • The fence is adjustable and can rotate at an angle of 90 degrees and 45 degrees in and out
  • The dimensions of the table are 6 ¼ x 28 ½ inches while those of the fence is 4 5/16 x 22 7/8 inches. 

8. RIKON Power Tools 20-600H 6″ Benchtop Jointer with Helical Cutter head

RIKON Power Tools 20-600H 6" Benchtop Jointer with Helical Cutter head - Benchtop Jointer

Here is our next benchtop jointer. The 36 pounds helical cutter-head comes with 12 two-sided inserts with an on/off safety switch attached. It also has a fence that tilts 90 to 135 degrees.

The Rikon Power benchtop jointer works with 120 volts, and the watts is 1200. The helical cutter-head backed by 12 HSS isn’t just a design. It helps to ensure super smooth cutting with flat, neat results on the surface.

Its design is in such a way that it performs according to the expectations when it comes to cutting as well as flat surfacing. It also has a fence that tilts 90 to 135 degrees. It has an all-metal construction that guarantees you the longevity of a product.

Features
  • To ensure that your working environment remains clean, it has a dust port which measures 2 ½ inches
  • It sees to it that you have an easy time when changing the knife
  • Dimensions are 17.5 x 30 x 13 inches
  • It has two push blocks
  • Its insert cutters have two edges. 


7. Jet JJP-8BT 8-Inch Bench Top Jointer/Planer

Jet JJP-8BT 8-Inch Bench Top Jointer/Planer - Benchtop JointerIf you are considering saving spaces while achieving so much in your work, this is your deal. The heavy-duty 13-Amp motor offers 18,000 woodcuts in just a minute. It works at 19-1/2feet per minute. It also comes with an out-feed table that receives sheet metals. With all that made possible, why would you hesitate to purchase one?

Its design incorporates two important tools. They are the benchtop jointer as well as the planner. That is what I term as killing two birds with the same stone. You will be able to adjust the height while working so you can get to use comfortably.

All these are completed with two fast speed steel knives for perfect smooth cuts. Quality is a guarantee because of its powerful motor. Its material is sturdy aluminum which means that you will enjoy its services for a relatively long time.

Features
  • It is easy to use all thanks to the ergonomic knobs
  • Its fence can rotate at an angle of up to 45 degrees
  • The knobs also offer you all the control that you may need when using the tool
  • Expect nothing short of accuracy as well as precision
  • As a result of its versatility, it can handle various sizes of materials
  • Lastly, you have a 3-year warranty to go with it. 


6. WEN 6560 10-Amp 6-Inch Benchtop Jointer with Filter Bag

WEN 6560 10-Amp 6-Inch Benchtop Jointer with Filter Bag - Benchtop Jointer

This WEN 6560 is a beast that will deliver mouth-watering results anytime. It comes with a cast iron base that removes materials with precision and speed.

IT’s 10-amp motor works seamlessly with the 6-inch blades cutter-head delivering 20,000 cuts per minutes. It also has a cast iron that brings stability during operation. You have a side filter bag that stores chips evacuated through a special dust port. Its design incorporates a big table. That provides you with enough space to do your flattening as well as straightening.

In addition to that, its fence is adjustable. That and other features including a powerful motor makes it a worthwhile investment. When it comes to the choice of the materials of the product, the selection is impressive. It is none other than cast iron.

Features
  • The motor uses 10 Amp
  • You should expect not less than 20,000 cuts in every minute
  • Dimensions of the table are 6 ½ by 4 ½ inches
  • It has a cutter head with two blades and which measures 6 1/8 inches
  • Vibration as well as walking while operating on a bench jointer will be a thing of the past.
  • Angle of fence is up to 45 degrees
  • The fence measures 22 ¾ by 4 ½ inches
  • Lastly, it comes with a 2-year warranty. 


5. Woodtek 115955, Machinery, Jointers & Planers, 6″ Bench Top Jointer 1-1/2hp 120v 10 Amp

Woodtek 115955, Machinery, Jointers & Planers, 6" Bench Top Jointer 1-1/2hp 120v 10 Amp - Benchtop Jointer

The Woodtek 115855 is a 6” Benchtop jointer that you can comfortably carry around for works. The machine weighs 48 pounds and runs on 120 volts.

Other features that make it a leading tools include cast iron tables with an aluminum fence that can be adjusted for different shapes of cuts. You have the height coming with an adjustable twist knob. For safety purposes, the cutter-head knives have front and rear guards giving you fewer distractions while using the machine.

Its design is in such a way that it can slant to facilitate cuts such as chamfer, bevel and straight ones. In addition to that, this benchtop jointer protects its cutter head knives with its front as well as rear safety guards. When it comes to quality, expect a long-lasting device. What do you expect when materials are cast iron and aluminum for the table and fence, respectively?

Features
  • Its cut depth is 1/8
  • It can accommodate a material with a width ranging from ¼ to 6 inches
  • The minimum length is 8 inches
  • Dimensions of the table are 13 5/8 by 6 1/8 inches
  • The fence measures 23 5/8 by 4 ½ inches
  • Its fence can rotate at an angle of up to 45 degrees either in or out
  • You have it with 12-month parts and workmanship warranty. 


4. Shop Fox W1829 Benchtop Jointer, 6-Inch

Shop Fox W1829 Benchtop Jointer, 6-Inch - Benchtop Jointer

Shop Fox W1829 is a heavy-duty benchtop jointer that weighs 80 pounds with 29.5 x 19.8 x 12.5 inches dimension. It is a high recommendation if you want to produce faces that are not only straight but also flat. Trust it because it will also not disappoint when it comes to squaring further layout, joining and construction. See what it is made of as there is a discussion of the same below.

While designing the piece, the manufacturer knew all too well what anyone would seek in a benchtop jointer. You have the 6-inch capacity with a sturdy cast iron construction blend into a compact design.

The fence is fully adjustable, and you won’t have to bother about knife set since it comes with a quick adjustment knife design. You also have a dust port on the side that gets the chips discharged without stress.

Features
  • It has a powerful 1 ½ HP motor. Its voltage is 110V while the power is 12 Amp
  • The table measures 28 ½ by 6 ¼ inches
  • It has two cutter head knives
  • The cutter head speed is 10,000 RPM with 20,000 cuts per second
  • Its fence can tilt to an angle of between 45 and 90 degrees
  • The maximum depth of cut is 1/8 inches. 


3. Grizzly G0725 6 by 28-Inch Benchtop Jointer

Grizzly G0725 6 by 28-Inch Benchtop Jointer

 

The size of this bench jointer is something that has been a huge put-off to people who come across it. Little do they know that it is not a limitation and it does not in any way affect its functionality? For your sake, I want to tell you that you cannot afford to make that mistake that your predecessors made. That is why I want you to make sure that you check it out before making a choice.

Its design ensures that you get a tool that performs according to the expectations if not beyond them. One such strategy towards achieving that is its motor. The 1 ½ HP single-phase motor has a voltage of 110v. The perfect choice of cast iron for the table as well as the fence makes it durable.

Features
  • The speed of the cutter head is 10,000 RPM
  • You can easily adjust the knives
  • It has a dust port that measures 2 1/2 inches
  • Thanks to its small size, it is not only easy to transport but also occupies a small space
  • It allows a bevel adjustment at about 45 degrees. 


2. POWERTEC BJ600 Bench Jointer with Built-In Dust Collection, 6-1/8-Inch

 

POWERTEC BJ600 Bench Jointer with Built-In Dust Collection, 6-1/8-Inch

This is another great choice if you are looking for a perfect bench jointer. It will offer you an easy time when it comes to bevel and chamfer cuts. In addition to that, you can say goodbye to a dirty workstation. The features that facilitate the same unfolds in a moment. Read on!

Safety was one of the issues of focus during the designing of this tool. That explains why there is a power switch lock. What are the fun and comfort when you are not sure if you will be hurt the next minute? Durability was yet another thing of interest.

For that reason, the infeed, as well as the outfeed tables, are of cast iron. They have used the same material for the fence. Due to its longevity, I can consider it a worthwhile experience.

Features
  • The fence can tilt at an angle of 45 degrees either inward or outward
  • It is safe to use because of the safety power switch lock
  • Its universal motor has specifications such as 120V, 1 ¾ HP peak, 60 Hz, and 12 Amps.
  • Dimensions of the fence are 4 3/8 by 22 7/8 inches while its weight is 79 lbs.
  • The measurements of the table are 28 ½ by 6 ¼ inches
  • Its cutting depth capacity is 1/8 inches
  • The maximum cutting width is 6 1/8 inches. 


1. Jet JJP-10BTOS 10-Inch Bench-Top Jointer/Planer

Jet JJP-10BTOS 10-Inch Bench-Top Jointer/Planer - Benchtop Jointer

Our #1 benchtop jointer delivers exceptional results that are only found in big floor jointer models. It comes with a precision adjustable knobs and a precision blade guard. With a maximum cutting width of 10-inch, planer max cut depth to 0.08-inch and a jointer maximum cut depth of 1/8-inch. You have 18,000 cuts from this machine in a single minute.

Its two-in-one design is a major reason that it is on top of the list. They are the benchtop jointer as well as the planner. That is what I term as killing two birds with the same stone. You will be able to adjust the height while working so you can get to use comfortably.

All these are completed with two fast speed steel knives for perfect smooth cuts. Quality is a guarantee because of its powerful motor. The steel table is durable. That and its fence material which is sturdy aluminum means that you will enjoy its services for a relatively long time.

Features
  • It weighs 84 pounds with a corded-electric power source and a voltage of 116.00.
  • Its great motor of 13 Amp offers a great performance
  • It is ideal for a variety of applications involving cutting
  • The fence can tilt up to an angle of 45 degrees for accurate as well as stable jointing
  • It comes with a 3-year warranty. 


Conclusion

You can raise the quality of your work by improving the quality of tools you use. If you final touches that will leave the work glittering, these benchtop jointers are a must have for you. From the above discussion, the tools are great. It is those small details that align with your preferences that will make the decision easier.

Do not drop your gut in matters such as the head, dust collector options, power, fence, table, bed’s length and width, cutting edge and most importantly the size. With the help of those pointers and our list of the best benchtop jointers, the decision can’t get easier.

Related Post:

  1. Top 10 Best Head Massager In 2018
  2. Best TVs for Conference Room in 2018 Review
  3. Top 10 Best Digital Coaxial Cables in 2018

Leave a Reply

Your email address will not be published. Required fields are marked *